Board logo

标题: [使用经验]Bitspirit（比特精灵）在KIS中的规则 [打印本页]
作者: bigblock    时间: 2006-11-28 01:36     标题: [使用经验]Bitspirit（比特精灵）在KIS中的规则

  1. [BITSPIRIT.EXE]
  2. App=E:\prc\BITSPIRIT\BITSPIRIT.EXE
  3. CommandLine=
  4. UseCommandLine=0
  5. Name=Allow HTTP/tracker update connection
  6. Enable=1
  7. Allow=1
  8. Log=0
  9. Warning=0
  10. Protocol=TCP
  11. Direction=OutboundStream
  12. RemotePort=80, 443, 82, 89, 109
  13. Name=Allow TCP loopback
  14. Enable=1
  15. Allow=1
  16. Log=0
  17. Warning=0
  18. Protocol=TCP
  19. Direction=InboundStream
  20. RemoteAddress=127.0.0.1
  21. Name=Allow TCP Outbound
  22. Enable=1
  23. Allow=1
  24. Log=0
  25. Warning=0
  26. Protocol=TCP
  27. Direction=OutboundStream
  28. RemotePort=1024-65535
  29. Name=Allow TCP Inbound
  30. Enable=1
  31. Allow=1
  32. Log=0
  33. Warning=0
  34. Protocol=TCP
  35. Direction=InboundOutbound
  36. RemotePort=1024-65535
  37. LocalPort=25200
  38. Name=Allow UDP Outbound
  39. Enable=1
  40. Allow=1
  41. Log=0
  42. Warning=0
  43. Protocol=UDP
  44. Direction=OutboundStream
  45. RemotePort=1024-65535
  46. LocalPort=25200
  47. Name=Allow UDP Inbound
  48. Enable=1
  49. Allow=1
  50. Log=0
  51. Warning=0
  52. Protocol=UDP
  53. Direction=InboundStream
  54. RemotePort=1024-65535
  55. LocalPort=25200
  56. Name=Block TCP Inbound
  57. Enable=1
  58. Allow=0
  59. Log=0
  60. Warning=0
  61. Protocol=TCP
  62. Direction=InboundStream
  63. Name=Block TCP Outbound
  64. Enable=1
  65. Allow=0
  66. Log=0
  67. Warning=0
  68. Protocol=TCP
  69. Direction=OutboundStream
  70. Name=Block UDP
  71. Enable=1
  72. Allow=0
  73. Log=0
  74. Warning=0
  75. Protocol=UDP
  76. Direction=InboundOutbound
复制代码
具体方法请参照此帖.
http://www.thysea.com/lb/cgi-bin/topic.cgi?forum=178&topic=19&show=0



欢迎光临 黑色海岸线论坛 (http://bbs.thysea.com/) Powered by Discuz! 7.2